▌XADO Revitalizant EX120
for gearboxes, transfer cases and differentials
The product is designed for restoration, repair and antiwear protection of manual transmission assemblies.
During the treatment of manual transmission assemblies the product forms a ceramic-metal coating on surfaces of their gears, shafts, bearings, synchronizers and other metal parts. As a result the geometry of parts is restored.
The revitalizant is universally applied for manual, robotized, sequential gearboxes, including Direct Shift gearboxes, transfer cases and axles (differentials).
Advantages
• Eliminates cavities and scratches on operating surfaces.
• Optimizes contact patterns in gear engagements.
• Provides considerable fuel savings (especially for all-wheel drive vehicles).
• Reduces noise and vibrations of assemblies by 10 times.
• Increases gear shifting accuracy.
• Improves operation accuracy of synchronizers.
• Maintains durable and safe operation of transmission units (up to 1,000 km (600 miles) of run) in case of catastrophic oil loss.
Application
1. Introduce the necessary amount of revitalizant into the oil-filler neck (opening of the dipstick) of your gearbox, transfer case or axle gearbox.
2. Operate your car in regular mode. The treatment is considered complete after 50 hours of mechanism operation or 1,500 km (900 miles) of run.
Dosage
| Oil system capacity, L | 1– 2 | 2– 5 | 5– 8 |
| Quantity of 8 ml syringes,pcs | 1 | 2 | 3 |
| Treatment pattern | single-stage | ||
Note
1. A typical sign of beginning of the revitalization process is noise reduction during operation of the mechanism starting from the first kilometers/miles
of run after the treatment.
2. If the mechanism suddenly stops improving its operation, it may witness its considerable wear rate – the recommended dosage should be doubled.
3. If no operation improvements can be observed after 100–200 km (60–125 miles) of run, the most probable reason for that is false diagnostics.
4. The revitalizant is compatible with all types of oils for manual transmissions.
5. It does not enter into chemical reactions with them, does not change their viscosity and other physical and chemical properties.